Table of Contents
Advertisement
set the device to request the code. Keep the new
code secret and in a safe place separate from your
device. If you forget the code and your device is
locked, your device will require service.
Additional charges may apply, and all the
personal data in your device may be deleted. For
more information, contact a Nokia Care point or
your device dealer.
Personal Unblocking Key (PUK) code and PUK2
●
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
UPUK code — This code (8 digits) is required to
●
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.
Remote lock
To prevent unauthorised use of your device, you can
lock your device and memory card remotely using a
text message. You must define the text message,
and to lock your device, send the text message to
your device. To unlock your device, you need the
lock code.
To enable remote locking, and to define the text
14
message, select
Menu
Settings
and
Phone
>
Phone mgmt.
>
SIM card
Remote phone locking
>
Tap the text input field to enter the text message
content (5-20 characters), select
message. Enter the lock code.
Prolong battery life
Many features in your device increase the demand
on battery power and reduce the battery lifetime.
To save battery power, note the following:
Features that use Bluetooth technology, or
●
allowing such features to run in the background
while using other features, increase the demand
on battery power. Deactivate Bluetooth
technology when you do not need it.
Features that use wireless LAN (WLAN), or
●
allowing such features to run in the background
while using other features, increase the demand
on battery power. WLAN on your Nokia device
deactivates when you are not trying to connect,
not connected to an access point, or not scanning
for available networks. To further reduce battery
consumption, you can specify that your device
does not scan, or scans less often, for available
networks in the background.
If you have set
●
When available
>
there is no packet data coverage (GPRS), the
Security settings
Phone and
>
> Enabled.
, and verify the
Packet data connection
in connection settings, and
to
Advertisement
Table of Contents
