Settings; Access Codes - Nokia 002L103 User Manual

Software updates using your PC
Nokia Software Updater is a PC application that
enables you to update your device software. To
update your device software, you need a
compatible PC, broadband internet access, and a
compatible USB data cable to connect your device
to the PC.
To get more information, to check the release notes
for the latest software versions, and to download
the Nokia Software Updater application, see
www.nokia-asia.com/softwareupdate or your local
Nokia website.
To update the device software, do the following:
1. Download and install the Nokia Software
Updater application to your PC.
2. Connect your device to the PC using a USB data
cable, and select PC Suite
3. Open the Nokia Software Updater application.
The Nokia Software Updater application guides
you to back up your files, update the software,
and restore your files.

Settings

Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured,
based on your network service provider
information. You may have settings from your
mode.
service providers already installed in your device, or
you may receive or request the settings from the
network service providers as a special message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings.

Access codes

If you forget any of the access codes, contact your
service provider.
Personal identification number (PIN) code — This
●
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
UPIN code — This code may be supplied with the
●
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
phones.
PIN2 code — This code (4 to 8 digits) is supplied
●
with some SIM cards, and is required to access
some functions in your device.
Lock code (also known as security code) — The
●
lock code helps you to protect your device
against unauthorised use. The preset code is
12345. You can create and change the code, and
13