Table of Contents
Advertisement
Taking care of your device
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
Keep the device dry. Precipitation, humidity, and
●
all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If
your device does get wet, remove the battery,
and allow the device to dry completely before
replacing it.
Do not use or store the device in dusty, dirty
●
areas. Its moving parts and electronic
components can be damaged.
Do not store the device in high or cold
●
temperature. High temperatures can shorten the
life of electronic devices, damage batteries, and
warp or melt certain plastics. When the device
warms to its normal temperature from a cold
temperature, moisture can form inside the
device and damage electronic circuit boards.
Do not attempt to open the device other than as
●
instructed in this guide.
Do not drop, knock, or shake the device. Rough
●
handling can break internal circuit boards and
fine mechanics.
Do not use harsh chemicals, cleaning solvents, or
●
strong detergents to clean the device. Only use a
soft, clean, dry cloth to clean the surface of the
device.
Do not paint the device. Paint can clog the
●
moving parts and prevent proper operation.
Use only the supplied or an approved
●
replacement antenna. Unauthorised antennas,
modifications, or attachments could damage the
device and may violate regulations governing
radio devices.
Use chargers indoors.
●
Backup all data you want to keep, such as
●
contacts and calendar notes.
To reset the device from time to time for
●
optimum performance, power off the device and
remove the battery.
These suggestions apply equally to your device,
battery, charger, or any accessory.
Recycle
Always return your used electronic products,
batteries, and packaging materials to dedicated
collection points. This way you help prevent
161
Advertisement
Table of Contents
