Packet Data Access Points - Nokia 002L103 User Manual

you give WLAN the highest priority, the device
connects to the internet through WLAN, if available,
and through a packet data connection if not.
To create a new access point group, select
Options Manage
>
To add access points to an access point group, select
the group and Options
copy an existing access point from another group,
select the group, tap the relevant access point if it
is not already highlighted, and select
Organise Copy to other
>
To change the priority of an access point within the
group, select Options
priority.

Packet data access points

Select Menu Settings
>
Destinations Access
>
instructions on the screen.
To edit a packet data access point, open one of the
access point groups, and select an access point
marked with .
Follow the instructions from your service provider.
Select from the following:
Access point name
●
point name from your service provider.
78
New destination.
>
New access point. To
>
Options
dest..
Organise Change
> >
and Connectivity
>
point, and follow the
— You obtain the access
User name — The user name may be needed to
●
make a data connection, and is usually provided
by your service provider.
Prompt password
●
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
Password — A password may be needed to
●
make a data connection and is usually provided
by your service provider.
> Authentication
●
your password encrypted or
your password encrypted when possible.
Homepage — Depending on the access point
●
you are setting up, enter the web address or the
address of the multimedia message centre.
Use access point
●
if you want the device to ask for confirmation
before the connection using this access point is
created, or Automatically
to connect to the destination using this access
point automatically.
Select Options
>
following:
Network type
●
type to transfer data to and from your device. The
other settings depend on the selected network
type.
— If you must enter the
— Select Secure to always send
Normal to send
— Select After confirmation
if you want the device
Advanced settings and from the
— Select the internet protocol