Table of Contents
Advertisement
Registering one-touch speed
dialing numbers and names
The quickest way to dial a fax number is to use one-touch speed dialing. This allows you to dial a
number by pressing a single button. Before you can use one-touch speed dialing, you must
register the receiving number (up to 50 digits) with your fax.
You can also register the name of the party (up to 16 letters) ; the name appears on the printout of
the one-touch speed dialing list.
1
Press [Function].
2
Use [3] or [4] to select TEL REGISTRATION.
Press [Start/Copy].
1-TOUCH SPD DIAL
3
Press [Start/Copy].
01=
4
Use [3] or [4] to select the number of the one-touch speed dialing button you want to use
for the number.
If a number is already registered under this one-touch speed dialing button, the number is displayed
on the LCD.*
5
Enter the party's number (up to 50 digits) using the numeric buttons.
03=
2 50xxx_
Press [Start/Copy] to register the number.
6
Enter the party's name (up to 16 letters) using the numeric buttons (see p. 2-4).
CANON
Press [Start/Copy] to register the name.
7
To assign additional one-touch speed dialing numbers, start from step 4 .
To finish, press [Stop].
* To delete the name and number registered under the one-touch speed dialing button, press [Clear] and
[Start/Copy] after you perform steps 1 to 4 above.
:A
2
2-11
Advertisement
Table of Contents
