Connect The Ac Power Cord - Canon B45 - Faxphone B45 Bubble Jet Fax Machine Setup Sheet

Connect the AC power cord.

1 Plug the power cord connector into the rear of the fax.
2 Plug the other end of the power cord into a properly grounded 120 V AC power outlet.
NOTE
There is no power switch on the fax. The fax is on as long as it is plugged in.
Install the BJ cartridge.
1 Make sure the fax is plugged in.
2 Open the printer cover.
3 Raise the cartridge lock lever on the cartridge holder.
4 Remove the BJ cartridge from its package, then remove the orange protective cap q
and tape w.
NOTE
Discard the cap and tape. Never attempt to reattach them to the BJ cartridge print head.
IMPORTANT
• Store BJ cartridges out of the reach of children. If anyone
inadvertently ingests ink, consult a physician immediately.
• Do not touch the metallic areas on the BJ cartridge.
1
2
Do not touch these metallic areas.