Canon B45 - Faxphone B45 Bubble Jet Fax Machine Setup Sheet page 3

Connect the telephone line, handset, and external devices.
There are three jacks on the left side of the fax for connection of the following:
1 Connect the supplied telephone line cord to the L jack, then the other end to the
telephone line jack on your wall.
2 Place the handset in its cradle, and connect it to the h jack.
Ringer and speaker volume switch
To adjust the volume of the ringer and
speaker, use a pen or other pointed object
to move these switches to HIGH or LOW.
3 Connect an extension phone to the t jack.
NOTE
• If you have connected an external device to your fax, be sure to select the correct receive mode (see
step ).
• If the extention phone dose not have its own power supply, any redial data in the extention phone
memory may be lost after an extended fax transmission.
Handset
Extension phone (a telephone
that you may wish to have away
from the fax to use at a different
location) See Chapter 6 of the
User's Guide.
Telephone line
Ringer volume switch Speaker volume switch