Canon B45 - Faxphone B45 Bubble Jet Fax Machine Setup Sheet page 7

4 Press [TAM Mode] to set TAM MODE.
• When you set TAM MODE, the TAM LED lights up and the outgoing message is played.
• When you cancel TAM MODE, the TAM LED switches off. If you have any new telephone messages, the
messages are played automatically.
• To cancel TAM MODE, press [TAM Mode] again.
12/20
NOTE
• NO OGM is displayed on the LCD when no outgoing message has been recorded. You must record an
outgoing message.
• If you have any new telephone messages, the TAM LED blinks and the number of messages appears
on the LCD.
• The date and time when the telephone message was recorded, the number of telephone messages
and the number of the message being played are displayed whenever a message is played.
Select the Caller ID setting.
If you have subscribed to a Caller ID service with your telephone company, set
the CALLER ID setting to ON. The fax will display the caller's name and
phone/fax number on the LCD when you receive a call.
1 Press [Function], then press [Start/Copy].
USER SETTINGS
2 Use [3] or [4] to select RX SETTINGS, then press [Start/Copy].
ECM RX
3 Use [3] or [4] to select CALLER ID, then press [Start/Copy].
4 Use [3] or [4] to select ON, then press [Start/Copy].
5 Press [Stop] to return to standby mode.
NOTE
Contact your local telephone company for detailed information.
:00
OFF