Wiring Connection - Kenwood KDC-X396 Instruction Manual

Wiring connection

Subwoofer output terminals
Front output terminals
R L
Rear output terminals
Antenna terminal
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Light blue/yellow
(Steering remote control wire)
Light blue/yellow
(Marine remote control wire)
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Rear/subwoofer output
R L
terminals
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
STEERING WHEEL
For
REMOTE INPUT
remote control adapter
REMOTE CONT
For
MARINE unit (optional accessory)
REMOTE
For the latest information on marine accessories please go to:
http://www.kenwoodusa.com/Car_Entertainment/Marine/
(Not used)
ANT CONT
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
MUTE
system, consult your navigation manual.)
To the metallic body or chassis of the car
R L
Fuse (10 A)
: To Kenwood Wired Marine Remote Control
Car fuse box
Ignition key switch
Front output terminals
Rear/subwoofer output
terminals
: To the steering wheel
Car fuse box
Battery
19