Wiring Connection - Kenwood KMM-BT209 Quick Start Manual

Removing the unit

Wiring connection

Fuse (10 A)
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
ANT CONT
P. CONT
MUTE
NOTE: Total output for Blue/White wire
(*1) + (*2) is 12 V
ISO connectors
a Light blue/yellow: To the steering wheel remote control adapter
Antenna terminal
b Blue/white: To the power control terminal when using the optional power
c Brown: Connect to the device equipped with muting feature to mute this unit
d Yellow: Battery wire
e Red: Ignition wire
f Red: A7 from ISO connector
g Yellow: A4 from ISO connector
Pin
If no connections are made, do
A4
not let the wire come out from
A5
the tab.
A7
A8
B1, B2
B3, B4
B5, B6
350 mA
B7, B8
Part list (supplied)
(A) Faceplate (×1)
(B) Trim plate (×1)
(C) Mounting sleeve (×1)
(D) Wiring harness (×1)
(E) Extraction key (×2)
amplifier or to the antenna control terminal in the vehicle
Color and function (for ISO connectors)
Yellow
Blue/White*1
Red
Black
Purple ], Purple/black [
Gray ], Gray/black [
White ], White/black [
Green ], Green/black [
: Battery
: Power control
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
3