Kenwood KDC-X396 Instruction Manual page 17

Cd-receiver
Hide thumbs Also See for KDC-X396:
Table of Contents

Advertisement

Available languages

Available languages

Symptom
"IN" flashes.
CD-R/CD-RW cannot be played back and
tracks cannot be skipped.
Disc sound is sometimes interrupted.
"NA FILE" appears.
"NO DISC" appears.
"TOC ERROR" appears.
"ERROR 99" appears.
"READ ERROR" appears.
"NO DEVICE" appears.
"COPY PRO" appears.
"NO MUSIC" appears.
"NA DEVICE" appears.
"USB ERROR" appears.
"iPod ERROR" appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
The number of songs contained in "SONGS"
category of this unit is different from that
contained in "SONGS" category of iPod.
Correct characters are not displayed (e.g.
album name).
"PANDORA ERR 5"/ "PNDR ERR 5"
appears.
"NO STATIONS" appears.
"NO SKIPS" appears.
"CHK DEVICE" appears.
Remedy/Cause
The CD player is not operating properly. Reinsert the disc properly. If the
condition did not improve, turn off the unit and consult your nearest service
center.
Insert a finalized CD-R/CD-RW (finalize with the component which you used
for recording).
Stop playback while driving on rough roads. / Change the disc. / Check the cords
and connections.
The unit is playing an unsupported audio file.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try
another disc instead.
The unit is malfunctioning for some reason. Press the reset button on the unit. If
the "ERROR 99" code does not disappear, consult your nearest service center.
Copy the files and folders for the USB device again. If the error message is still
displayed, initialize the USB device or use other USB devices.
No USB device is connected. Connect an USB device, and change the source to
USB again.
A copy-protected file is played.
The connected USB device contains no playable audio file.
Connect a supported USB device, and check the connections.
Remove the USB device, turn the unit off, then turn it on again. If the unit still
showing the same display, try to connect another USB device.
Reconnect the iPod. / Reset the iPod.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
Podcast files are not counted in this unit as this unit does not support the
playback of podcast files.
This unit can only display letters (upper case), numbers, and a limited number
of symbols.
Thumb up/down operation has failed.
No station is found.
The skip count limit has been exceeded.
Check the Pandora® application on the iPhone/iPod touch.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-202uKdc-352uKdc-252uKdc-mp252uKdc-mp152uKmr-350u

Table of Contents