Kenwood KDC-BT375U Instruction Manual
Hide thumbs Also See for KDC-BT375U:
Table of Contents

Advertisement

Available languages

Available languages

KDC-X303
KDC-BT375U
KDC-BT350U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X303/KDC-BT375U/KDC-BT350U/KDC-BT33/KDC-BT275U/KDC-BT23/KDC-MP375BT/KMR-D375BT
Serial number
US Residents Only
© 2018 JVC KENWOOD Corporation
KDC-BT33
KDC-BT275U
KDC-BT23
Register Online
Register your Kenwood product at http://www.kenwood.com/usa/
KDC-MP375BT
KMR-D375BT
B5A-2599-20 (KN)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KDC-BT375U

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2 Póngase en contacto con su administración local para obtener información sobre el Products: CD RECEIVER punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación Model Name: KDC-X303/KDC-BT375U/KDC-BT350U/KDC-BT33/KDC-BT275U/ de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos KDC-BT23/KDC-MP375BT/KMR-D375BT perjudiciales en la salud y el medio ambiente.
  • Page 3 IC (Industry Canada) Notice CAUTION This device complies with Industry Canada’s licence-exempt RSSs. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled Operation is subject to the following two conditions: environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio (1) This device may not cause interference;...
  • Page 4 SOFTWARE LICENSE AGREEMENT Article 4 Right pertaining to the Licensed Software The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is Any and all copyrights and other rights pertaining to the Licensed Software and related documents copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or which Users shall follow in order to use the Licensed Software.
  • Page 5 Important Notice concerning the Software Article 10 Protection of Copyright -jansson 1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> and the Original Rightholder, and in no event shall they be Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), under the ownership of the User.
  • Page 6: Table Of Contents

    CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings BASICS and Cautions in this manual. GETTING STARTED • Please keep the manual in a safe and accessible place for future reference. 1 Select the display language WARNING and cancel the demonstration...
  • Page 7: Basics

    BASICS Faceplate Remote control (RC-406) (supplied for Display window Remote sensor (Do not expose to bright Volume Loading sunlight.) knob slot Lights up when Pull out the insulation sheet when Bluetooth using for the first time. connection is established.*1 : Can be remotely controlled (Page 17) with an optionally purchased remote control.
  • Page 8: Getting Started

    GETTING STARTED To set the date Turn the volume knob to select [DATE FORMAT], then press the knob. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. Turn the volume knob to select [DATE SET], then press the knob. Turn the volume knob to make the settings, then press the knob.
  • Page 9 • For connection, see “Connecting external components” on page 41. [SPOTIFY SRC] [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. • Refer also to the supplied instruction manual of the KENWOOD Marine (Page 13) Remote Control unit for more information.
  • Page 10: Radio

    [REM ID3], then press the knob. signal from FM broadcast. “REGISTERING” appears on the display window. To register, on the KENWOOD Marine Remote Control unit: Search for a station • Press ENTER to register as [REM ID1]. • Press SRC to register as [REM ID2].
  • Page 11 RADIO Other settings [TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up). ; [OFF]: Cancels. Press the volume knob to enter [FUNCTION]. [PTY SEARCH] (For Turn the volume knob to select an item (see the following table), then press the knob.
  • Page 12: Cd/Usb/Ipod/Android

    CD/USB/iPod/ANDROID Start playback The source changes automatically and playback starts. Eject disc Label side On the faceplate On the remote control Play back/pause Press 6 IW. Press ENT IW. Reverse/Fast-forward*4 Press and hold S / T. Press and hold S / T (+). USB input terminal Select a track/file Press S / T.
  • Page 13 (applicable only for iPod USB source or iPod BT source) Preparation: You can search for a file according to the first character. • Install the latest version of KENWOOD Remote application on your device before connecting. Turn the volume knob quickly to enter character search.
  • Page 14: Aux

    CD/USB/iPod/ANDROID Preparation: Direct Music Search (using the remote control) • Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 5) Press DIRECT. Press the number buttons to enter a track/file number. Start listening Press ENT IW to search for music. Connect a portable audio player (commercially available). •...
  • Page 15: Pandora

    Pandora® Preparation: Create and store a new station Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in Press to Pandora. Turn the volume knob to select [NEW STATION], then press the knob. •...
  • Page 16: Iheartradio

    iHeartRadio® Preparation: On the faceplate On the remote control Install the latest version of iHeartAuto application on your device (iPhone/ Press 6 IW. Press ENT IW. Play back/pause iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. (Page 5) Press T.
  • Page 17: Spotify

    Spotify Preparation: On the faceplate On the remote control Install the latest version of the Spotify application on your device (iPhone/ Random play*5 Press 3 repeatedly *3. iPod touch), then create an account and log in to Spotify. ( Not available ) •...
  • Page 18: Siriusxm® Radio

    SiriusXM® Radio (for Only SiriusXM® brings you more of what you love to listen to, all in one place. Start listening Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite Press B SRC repeatedly to select SIRIUS XM.
  • Page 19: Press And Hold S / T

    SiriusXM® Radio (for SiriusXM Keymode SmartFavorites and TuneStart™ User stored channels are recognized as SmartFavorite channels*. The Press and hold the volume knob to change the keymode (channel or SiriusXM Vehicle Tuner automatically buffers the broadcast content in the replay). (Default: Channel keymode) background.
  • Page 20 SiriusXM® Radio (for SiriusXM settings [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to Press the volume knob to enter [FUNCTION]. lock. ; [OFF]: Cancels. Turn the volume knob to select an item (see the following table), then [CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
  • Page 21: Bluetooth

    BLUETOOTH® BLUETOOTH — Connection Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. Supported Bluetooth profiles – Hands-Free Profile (HFP) Pair and connect a Bluetooth device for the first time –...
  • Page 22: Press

    BLUETOOTH® The following operations may differ or be unavailable depending on the Auto Pairing connected phone. When you connect iPhone/iPod touch to the USB input terminal, pairing On the faceplate On the remote control request (via Bluetooth) is automatically activated. First incoming call...
  • Page 23 BLUETOOTH® *1 This adjustment will not affect the volume of the other sources. Make a call *2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.
  • Page 24 BLUETOOTH® Make a call using voice recognition [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the connected phonebook contains many contacts).
  • Page 25: Press And Hold

    BLUETOOTH® Other settings [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item (see the following table), then press the knob. Bluetooth test mode Repeat step 2 until the desired item is selected/activated or follow the You can check the connectivity of the supported profile between the...
  • Page 26: On The Remote Control

    BLUETOOTH® BLUETOOTH — Audio On the faceplate On the remote control Repeat play Press 4 repeatedly. ( Not available ) [ALL REPEAT], [FILE REPEAT], [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM]. ( Not available ) • Press 3 to select While in BT AUDIO source, you can connect to five Bluetooth audio devices [RANDOM OFF].
  • Page 27 [ANDROID NOT CONNECTED]: No Android device is connected to use the application. Preparation: • Install the latest version of KENWOOD Remote application on your device * Displayed only when [ANDROID] of [SELECT] is set to [YES]. before connecting. • For more information, visit <www.kenwood.com/cs/ce/>.
  • Page 28 BLUETOOTH® Listen to Spotify Internet radio via Bluetooth Preparation: You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. (Page 5) iPhone/iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device. Start up the Spotify application on your device.
  • Page 29: Audio Settings

    AUDIO SETTINGS [MANUAL EQ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [62.5HZ] [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source.
  • Page 30 AUDIO SETTINGS [X ‘ OVER] [SOUND EFFECT] [TWEETER] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [SOUND RECNSTR] (Not applicable for RADIO source, AUX source and SIRIUS XM source.) [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the (Sound [ON]: Creates realistic sound by compensating the high-frequency crossover frequency for the tweeter speaker. reconstruction) components and restoring the rise-time of the waveform that are lost in audio data compression.
  • Page 31 AUDIO SETTINGS Digital Time Alignment settings [SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the crossover slope. Digital Time Alignment sets the delay time of the speaker output to create a (Selectable only if a setting other than [THROUGH] is more suitable environment for your vehicle. selected for [SW LPF FRQ].) •...
  • Page 32: Display Settings

    DISPLAY SETTINGS AUDIO SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], Zone identification for color settings and brightness settings select the speaker you want to adjust: [FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER] – You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
  • Page 33 DISPLAY SETTINGS Other settings [DIMMER] Dims the illumination. [ON]: Dimmer is turned on. Press the volume knob to enter [FUNCTION]. [OFF]: Dimmer is turned off. Turn the volume knob to select an item (see the following table), then [DIMMER TIME]: Set the dimmer on and off time. press the knob.
  • Page 34: Learning Steering Remote Control

    Bright green/red remote harness. Learning steering To reassign the control keys Contact your remote input KENWOOD dealer Purple/red terminal Press B SRC repeatedly to enter STANDBY. for details. Press the volume knob to enter [FUNCTION]. Rear panel Turn the volume knob to select [SYSTEM], then press the knob.
  • Page 35: References

    For: – Latest firmware updates and latest compatible item list • This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A. – KENWOOD original application – Any other latest information About iPod/iPhone Visit <www.kenwood.com/cs/ce/>.
  • Page 36 Accordingly, compatibility may be impaired or some or all of the services may become • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. unavailable. • Depending on the version of the operating system of the iPod/iPhone, some functions may not •...
  • Page 37 REFERENCES Change the display information Source name Display information: Main display (for ANDROID Source name Date back to the beginning Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information PANDORA/ Station name Shared/Radio...
  • Page 38 REFERENCES Change the display information Source name Display information: Main display (for ANDROID Source name/Clock Clock Turns off the display* back to the Each time you press DISP, the display information changes. beginning • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg.
  • Page 39: Troubleshooting

    TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. Disc cannot be ejected. Press and hold to forcibly eject the disc. Be careful not • Check the cords and connections. to drop the disc when it is ejected. If this does not solve the problem, reset the unit (page 3).
  • Page 40 TROUBLESHOOTING Symptom Remedy Symptom Remedy The iPod/iPhone does not • Check the connection between this unit and iPod/iPhone. Playback is intermittent or Turn off the power saving mode on the Android device. turn on or does not work. • Disconnect and reset the iPod/iPhone using hard reset. sound skips.
  • Page 41 TROUBLESHOOTING Symptom Remedy Symptom Remedy “DISCONNECTED” USB is disconnected from the head unit. Please make sure “CODE ERROR” Make sure you have entered the correct pass code. the device is connected properly through USB. (Page 16) “CONNECTING” • Connected via USB input terminal: The device is connecting “NO CONTENT”...
  • Page 42: Installation/Connection

    INSTALLATION/CONNECTION TROUBLESHOOTING Warning Symptom Remedy • The unit can only be used with a 12 V DC power supply, negative ground. The connected Bluetooth • Check whether the connected Bluetooth audio player • Disconnect the battery’s negative terminal before wiring and mounting. audio player cannot be supports Audio/Video Remote Control Profile (AVRCP).
  • Page 43 INSTALLATION/CONNECTION Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (×1) (B) Trim plate (×1) Do the required wiring. (Page 40) (C) Mounting sleeve (×1) (D) Wiring harness (×1) Hook on the top side Orientate the trim Dashboard of plate as illustrated your car before fitting.
  • Page 44 If no connections are made, do not let the wire come out from the tab. To front speaker (left) White/Black Gray Brown To connect the KENWOOD navigation system, refer your Gray/Black To front speaker (right) (Mute control wire) navigation manual...
  • Page 45 INSTALLATION/CONNECTION Connecting external components To KENWOOD Marine Remote Control unit, KCA-RC55MR (optional accessory) (page 5) Learning steering remote control (page 30) Microphone input jack (page 17) Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner (commercially available) (page 14) Output terminals When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging...
  • Page 46: Specifications

    SPECIFICATIONS FM Frequency Range MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio AAC Decode AAC-LC “.aac” files 87.9 MHz — 107.9 MHz (200 kHz step) USB Standard USB 1.1, USB 2.0 (Full speed) File System FAT12/16/32 87.5 MHz —...
  • Page 47 SPECIFICATIONS Maximum Output Power 50 W × 4 Operating Voltage 12 V DC car battery Full Bandwidth Power 22 W × 4 Installation Size (W × H × D) 182 mm × 53 mm × 155.5 mm (at less than 1 % THD) (7-3/16"...
  • Page 48 TABLE DES MATIERES AVANT L’UTILISATION AVANT L’UTILISATION IMPORTANTES • Pour utiliser correctement l’appareil, veuillez ce manuel complément avant de l’utiliser. Il est particulièrement important que vous lisiez et acceptiez les FONCTIONNEMENT avertissements et les précautions de ce manuel. DE BASE •...
  • Page 49 FONCTIONNEMENT DE BASE Façade Télécommande (RC-406) (fourni pour Fenêtre d’affichage Capteur de télécommande (Ne l’exposez Pas à Bouton de Fente la lumière directe du soleil.) volume d’insertion S’allume quand Retirez la feuille d’isolant lors de la la connexion première utilisation. Bluetooth est établie.*1 (Page 17)
  • Page 50: Prise En Main

    PRISE EN MAIN Pour régler la date Tournez le bouton de volume pour choisir [DATE FORMAT] , puis appuyez sur le bouton. Tournez le bouton de volume pour choisir [DD/MM/YY] [MM/DD/YY] , puis appuyez sur le bouton. Tournez le bouton de volume pour choisir [DATE SET] , puis appuyez sur le bouton.
  • Page 51 [IHEART SRC] [ON] : Met en service IHEARTRADIO dans la sélection de la source. ; [OFF] : Hors Applicable uniquement quand la télécommande marine KENWOOD service. (Page 12) (KCA-RC55MR, accessoire en option) est connectée à cet appareil. [SPOTIFY SRC] [ON] : Met en service SPOTIFY/SPOTIFY BT dans la sélection de source.
  • Page 52: Radio

    • L’appareil commute sur l’alarme FM automatiquement lors de la réception d’un “REGISTERING” apparaît dans la fenêtre d’affichage. signal d'alarme d’une émission FM. Pour enregistrer, sur la télécommande marine KENWOOD: • Appuyez sur ENTER pour enregistrer comme [REM ID1] Recherchez une station •...
  • Page 53 RADIO Autres paramètres [TI] [ON] : Permet à l’appareil de commuter temporairement sur les informations [OFF] routières si elles sont disponibles (“TI” s’allume). ; : Annulation. Appuyez sur le bouton de volume pour entrer [FUNCTION] [PTY SEARCH] Tournez le bouton de volume pour sélectionner un élément (voir le tableau (Pour suivant), puis appuyez sur le bouton.
  • Page 54: Cd/Usb/Ipod/Android

    CD/USB/iPod/ANDROID Démarrez la lecture La source change automatiquement et le lecture démarre. Face portant l’étiquette Éjectiez le disque Pour Sur la façade Sur la télécommande Lecture/pause Appuyez sur 6 Appuyez sur ENT Recherche rapide vers Maintenez enfoncée Maintenez enfoncée Prise d’entrée USB l’arrière/vers l’avant*4 (+).
  • Page 55 Recherche à saut (applicable uniquement pour la source iPod USB ou la Préparation: source iPod BT) • Installez la dernière version de l’application KENWOOD Remote sur votre Appuyez sur pour faire une recherche d’une ampleur périphérique avant la connexion. prédéfinie. (Page 10) •...
  • Page 56: Aux

    CD/USB/iPod/ANDROID Préparation: Recherche directe de morceau (utilisation de la télécommande) • Sélectionnez [ON] pour [BUILT-IN AUX] dans [SOURCE SELECT] . (Page 5) Appuyez sur DIRECT. Appuyez sur les touches numériques, entrez le numéro de plage/fichier. Démarrez l’écoute Appuyez sur ENT pour rechercher un morceau. Connectez un lecteur audio portable (en vente dans le commerce).
  • Page 57: Pandora

    Pandora® Préparation: Création et mémorise une nouvelle station Installez la dernière version de l’application Pandora sur votre appareil (iPhone/iPod touch), puis créez un compte et connectez- Appuyez sur vous sur Pandora. Tournez le bouton de volume pour choisir [NEW STATION] , puis appuyez sur le bouton.
  • Page 58: Iheartradio

    iHeartRadio® Préparation: Pour Sur la façade Sur la télécommande Installez la dernière version de l’application iHeartAuto sur votre appareil (iPhone/ iPod touch), puis créez un compte et connectez-vous sur iHeartRadio. Lecture/pause Appuyez sur 6 Appuyez sur ENT • Sélectionnez [ON] pour [IHEART SRC] dans...
  • Page 59: Spotify

    Spotify Préparation: Pour Sur la façade Sur la télécommande Installez la dernière version de l’application Spotify sur votre appareil (iPhone/ iPod touch), puis créez un compte et connectez-vous sur Spotify. Lecture aléatoire*5 Appuyez répétitivement sur • Sélectionnez [ON] pour [SPOTIFY SRC] dans [SOURCE SELECT] .
  • Page 60: Radio Siriusxm

    Radio SiriusXM® (pour Seul SiriusXM® vous apporte plus de ce que vous aimez écouter, en un seul Démarrez l’écoute endroit. Obtenez plus de 140 canaux, y compris de la musique sans pauses publicitaires, le meilleur du sport, les nouvelles, les discussions, les comédies et Appuyez répétitivement sur SRC pour choisir SIRIUS XM.
  • Page 61 Radio SiriusXM® (pour Mode de touche SiriusXM SmartFavorites et TuneStart™ Maintenez enfoncé la touche de volume pour changer le mode de touche Les canaux mémorisé de l’utilisateur sont reconnus comme canaux (canal ou relecture). (Défaut: Mode de touche canal) SmartFavorite*. Le tuner SiriusXM Vehicle met automatiquement en cache le “...
  • Page 62 Radio SiriusXM® (pour Réglages SiriusXM [LOCK SETTING] [MATURE CH] : Sélectionne le réglage du verrouillage défini SiriusXM. ; [USER DEFINED] : Sélectionne les canaux individuels que l’utilisateur Appuyez sur le bouton de volume pour entrer [FUNCTION] [OFF] souhaite verrouiller. ; : Annulation.
  • Page 63: Bluetooth

    BLUETOOTH® BLUETOOTH — Connexion En fonction du système d’exploitation et de la version du micrologiciel de votre téléphone portable, la fonction Bluetooth peut ne pas fonctionner avec cet appareil. Profiles Bluetooth pris en charge – Hands-Free Profile — Profile mains libres (HFP) –...
  • Page 64 BLUETOOTH® Les opérations suivantes peuvent différer ou peuvent ne pas être disponibles en Pairage automatique fonction du téléphone connecté. Quand vous connectez un iPhone/iPod touch à la prise d’entrée USB, la demande Pour Sur la façade Sur la télécommande de pairage (via Bluetooth) est activée automatiquement. Premier appel entrant...
  • Page 65 BLUETOOTH® *1 Cet ajustement n’affecte pas le volume des autres sources. Faire un appel *2 Maintenez VOL enfoncé de façon continue pour augmenter le volume sur 15. *3 Les opérations peuvent différer en fonction du périphérique Bluetooth connecté. Vous pouvez faire un appel à partir de l’historique, du répertoire d’adresses ou composer le numéro.
  • Page 66 BLUETOOTH® Faites au appel en utilisant la reconnaissance vocale [PHONE BOOK] (Applicable uniquement quand le téléphone prend en charge PBAP.) Tournez le bouton de volume rapidement pour entrer en mode de recherche Maintenez enfoncée pour activer la reconnaissance vocale du téléphone alphabétique (si le répertoire d’adresses contient beaucoup de contacts).
  • Page 67 BLUETOOTH® Autres paramètres [INITIALIZE] [YES] : Initialise tous les réglages Bluetooth (y compris le pairage mémorisé, [NO] le répertoire téléphonique, etc.). ; : Annulation. Appuyez sur le bouton de volume pour entrer [FUNCTION] Tournez le bouton de volume pour sélectionner un élément (voir le tableau suivant), puis appuyez sur le bouton.
  • Page 68 BLUETOOTH® BLUETOOTH — Audio Pour Sur la façade Sur la télécommande Lecture répétée Appuyez répétitivement sur ( Non disponible ) [ALL REPEAT] [FILE REPEAT] [REPEAT OFF] Lecture aléatoire Maintenez enfoncée 3 pour sélectionner [ALL RANDOM] ( Non disponible ) • Appuyez sur 3 pour Quand la source est BT AUDIO, vous pouvez vous connecter à...
  • Page 69 L’application KENWOOD Remote est conçue pour commander l’autoradio [IOS CONNECTED] : Vous pouvez utiliser l’application à l’aide de l’iPhone/iPod KENWOOD à partir de l’iPhone/iPod (via Bluetooth ou via la prise d’entrée USB) ou connecté via Bluetooth ou par la prise d’entrée USB. le smartphone Android (via Bluetooth).
  • Page 70 BLUETOOTH® Écoute de Spotify Radio internet via Bluetooth Préparation: Vous pouvez écouter la radio internet (Pandora, iHeartRadio et Spotify) sur votre Sélectionnez [ON] pour [SPOTIFY SRC] dans [SOURCE SELECT] . (Page 5) périphérique iPhone/iPod touch/Android via le Bluetooth de cet appareil. • Assurez-vous que la prise d’entrée USB n’est connectée à aucun périphérique. Démarrez l’application Spotify sur votre appareil.
  • Page 71: Réglages Audio

    RÉGLAGES AUDIO [MANUAL EQ] Ajuste vos propres réglages sonores pour chaque source. [USER] [PRESET EQ] • Les réglages sont mémorisés sur dans [EASY EQ] • Les réglages réalisés peuvent affecter les réglages actuels de [62.5HZ] [LEVEL] [LEVEL –9] à [LEVEL +9] [LEVEL 0] ): Réglez le niveau à...
  • Page 72 RÉGLAGES AUDIO [X ‘ OVER] [SOUND EFFECT] [TWEETER] [FRQ] [1KHZ] [1.6KHZ] [2.5KHZ] [4KHZ] [5KHZ] [SOUND RECNSTR] (Ne s’applique pas à la source RADIO, à la source AUX et à la source SIRIUS [6.3KHZ] [8KHZ] [10KHZ] [12.5KHZ] : Ajuste la (Reconstruction XM.) fréquence de transition de l’enceinte des aigus.
  • Page 73 RÉGLAGES AUDIO Réglages de l’alignement temporel numérique [SW LPF SLOPE] [–6DB] [–12DB] [–18DB] [–24DB] : Ajuste la pente de transition. L’alignement temporel numérique règle la temporisation de la sortie d’enceinte (Peut être uniquement sélectionné si un réglage autre pour créer un environnement qui convient mieux à votre véhicule. [THROUGH] [SW LPF FRQ] est choisi pour...
  • Page 74: Réglages D'affichage

    RÉGLAGES D’AFFICHAGE RÉGLAGES AUDIO [DISTANCE] [GAIN] [DTA SETTINGS] Identification de zone pour les réglages de la couleur et les réglages de la • Avant de réaliser un ajustement pour luminosité sélectionnez l’enceinte que vous souhaitez ajuster : [FRONT LEFT] [FRONT RIGHT] [REAR LEFT] [REAR RIGHT] [SUBWOOFER]...
  • Page 75 RÉGLAGES D’AFFICHAGE Autres paramètres [DIMMER] Assombrit l’éclairage. [ON] : Le gradateur est activé. Appuyez sur le bouton de volume pour entrer [FUNCTION] [OFF] : Le gradateur est désactivé. Tournez le bouton de volume pour sélectionner un élément (voir le tableau [DIMMER TIME] : Réglez l’heure de mise en et hors service du gradateur.
  • Page 76: Télécommande De Volant À Apprentissage

    Violet/rouge Tournez le bouton de volume pour choisir [SYSTEM] , puis appuyez sur le revendeur apprentissage bouton. KENWOOD pour les [USER S.REMO] Tournez le bouton de volume pour choisir , puis appuyez sur Panneau arrière détails. le bouton. Tournez le bouton de volume pour choisir...
  • Page 77: Références

    Pour: – Les dernières mise à jour du micrologiciel et la liste de compatibilité la plus récente • Cet appareil ne peut pas reconnaître les périphériques USB dont l’alimentation n’est pas de 5 V et – Application originale KENWOOD dépasse 1,5 A.
  • Page 78 Par conséquent, la compatibilité peut réduite ou certains services ou même tous • Il n’est pas possible d’utiliser un iPod lorsque “KENWOOD” ou “ ” est affiché sur l’iPod. les services peuvent devenir indisponibles. • Certaines fonction de Spotify ne peuvent pas être utilisées à partir de cet appareil.
  • Page 79 RÉFÉRENCES Changez l’information sur l’affichage Nom de la source Informations sur l’affichage: Affichage principal (pour ANDROID Nom de la source Date retour au début Chaque fois que vous appuyez sur DISP, les informations affichées changent. • Si aucune information n’est disponible ou si aucune information n’est enregistrée, “NO TEXT”, “NO INFO”, PANDORA/ Nom de la station Partagée/Radio...
  • Page 80 RÉFÉRENCES Changez l’information sur l’affichage Nom de la source Informations sur l’affichage: Affichage principal (pour ANDROID Nom de la source/Horloge Horloge Met l’affichage hors service* Chaque fois que vous appuyez sur DISP, les informations affichées changent. retour au début • Si aucune information n’est disponible ou si aucune information n’est enregistrée, “NO TEXT”, “NO INFO”, ou une autre information (par ex.
  • Page 81: Guide De Dépannage

    GUIDE DE DÉPANNAGE Symptôme Remède Symptôme Remède Le son ne peut pas être • Ajustez le volume sur le niveau optimum. Le disque ne peut pas être Maintenez enfoncée pour éjecter le disque de force. Faites entendu. • Vérifiez les cordons et les connexions. éjecté.
  • Page 82 GUIDE DE DÉPANNAGE Symptôme Remède Symptôme Remède iPod/iPhone ne peut pas • Vérifiez la connexion entre cet appareil et l’iPod/iPhone. La lecture est intermittente ou Déactivez le mode d’économie d’énergie sur le périphérique être mis sous tension ou ne • Déconnectez et réinitialisez l’iPod/iPhone en utilisant un le son saute.
  • Page 83 GUIDE DE DÉPANNAGE Symptôme Remède Symptôme Remède “DISCONNECTED” La prise USB est déconnectée de l’appareil principal. Assurez-vous “CODE ERROR” Assurez-vous que vous avez entré le code secret correct. que l’appareil est connecté correctement via USB. (Page 16) “CONNECTING” • Connecté via la prise d’entrée USB: L’appareil est connfecté à “NO CONTENT”...
  • Page 84: Installation/Raccordement

    INSTALLATION/RACCORDEMENT GUIDE DE DÉPANNAGE Avertissement Symptôme Remède • L’appareil peut uniquement être utilisé avec une alimentation de 12 V CC, à masse négative. Le lecteur audio Bluetooth • Vérifiez si le lecteur audio Bluetooth connecté prend en charge • Déconnectez la borne négative de la batterie avant le câblage et le montage. connecté...
  • Page 85 INSTALLATION/RACCORDEMENT Liste des pièces pour l’installation Installation de l’appareil (montage encastré) Façade (×1) Plaque d’assemblage (×1) Réalisez les connexions nécessaires. (Page 40) Manchon de montage (×1) Faisceau de fils (×1) Crochet sur le côté supérieur Orientez la plaque de Tableau de bord garniture de la façon de votre voiture illustrée avant la fixation.
  • Page 86 Si aucune connexion n’est faite, ne laissez pas le câble sortir de la languette. À l’enceinte avant (gauche) Blanc/Noir Gris Marron Pour connecter au système de navigation KENWOOD, reportez- Gris/Noir À l’enceinte avant (droite) (Câble de contrôle de la vous à votre manuel de navigation...
  • Page 87 INSTALLATION/RACCORDEMENT Connexion d’appareils extérieurs Pour la télécommande marine KENWOOD, KCA-RC55MR (accessoire en option) (page 5) Télécommande de volant à apprentissage (page 30) Prise d’entrée du microphone (page 17) Port d’extension (12 V 500 mA): Au tuner SiriusXM Vehicle optionnel (en vente dans le commerce) (page 14) Prises de sortie Lors de la connexion à...
  • Page 88: Spécifications

    SPÉCIFICATIONS FM Plage de fréquences Décodage MP3 Compatible avec le format MPEG-1/2 Audio Layer-3 Décodeur WMA Compatible Windows Media Audio Décode AAC Fichiers AAC-LC “.aac” 87,9 MHz — 107,9 MHz (pas de 200 kHz) Standard USB USB 1.1, USB 2.0 (Vitesse maximale) 87,5 MHz —...
  • Page 89 SPÉCIFICATIONS Puissance de sortie maximum 50 W × 4 Tension de fonctionnement Batterie de voiture 12 V CC Pleine Puissance de Largeur de Bande 22 W × 4 Dimensions d’installation (L × H × P) 182 mm × 53 mm × 155,5 mm (avec moins de 1% DHT) (7-3/16 pouces ×...
  • Page 90 CONTENIDO ANTES DEL USO ANTES DEL USO IMPORTANTE • Antes de utilizar este producto y para asegurar su uso correcto, lea completamente este manual. En especial, lea y acate las Advertencias y Precauciones PUNTOS BÁSICOS incluidas en este manual. PROCEDIMIENTOS INICIALES •...
  • Page 91: Puntos Básicos

    PUNTOS BÁSICOS Placa frontal Mando a distancia (RC-406) (suministrado para Ventanilla de visualización Sensor remoto (DO lo exponga a la luz solar Rueda de Ranura de brillante.) volumen carga Se ilumina cuando Retire la hoja aislante cuando se utilice se establece por primera vez.
  • Page 92: Procedimientos Iniciales

    PROCEDIMIENTOS INICIALES Para ajustar la fecha Gire la rueda de volumen para seleccionar [DATE FORMAT] y, a continuación, pulse la rueda. Gire la rueda de volumen para seleccionar [DD/MM/YY] [MM/DD/YY] y, a continuación, pulse la rueda. Gire la rueda de volumen para seleccionar [DATE SET] y, a continuación, pulse la rueda.
  • Page 93 : Habilita AUX en la selección de la fuente. ; [OFF] : Se deshabilita. suministrado con la unidad de mando a distancia para uso marino KENWOOD. (Página 10) [CD READ] : Distingue automáticamente entre disco de archivos de audio y CD de música.
  • Page 94: Radio

    • Al recibir una señal de alarma de radiodifusión FM, la unidad cambia Aparece “REGISTERING” en la ventanilla de visualización. automáticamente a la alarma FM. Para registrar, en la unidad de mando a distancia para uso marino KENWOOD: • Pulse ENTER para registrar como [REM ID1] Búsqueda de una emisora...
  • Page 95 RADIO Otros ajustes [TI] [ON] : Permite que la unidad cambie temporalmente a Información sobre el [OFF] tráfico, si está disponible (“TI” se enciende). ; : Se cancela. Pulse la rueda de volumen para ingresar en [FUNCTION] [PTY SEARCH] Gire la rueda de volumen para seleccionar un elemento (consulte la (Para siguiente tabla), y, a continuación, pulse la rueda.
  • Page 96 CD/USB/iPod/ANDROID Inicie la reproducción La fuente cambia automáticamente y se inicia la reproducción. Lado de la etiqueta Expulsa el disco Para En la placa frontal En el mando a distancia Reproducción/pausa Pulse 6  Pulse ENT Retroceder/avanzar Pulse y mantenga pulsado Pulse y mantenga pulsado rápidamente*4 (+).
  • Page 97 Preparativos: • Pulsando y manteniendo pulsado realiza la búsqueda a un • Antes de la conexión, instale la versión más reciente de la aplicación KENWOOD índice de 10 %. Remote en su dispositivo. • Para obtener más información, visite <www.kenwood.com/cs/ce/>.
  • Page 98: Aux

    CD/USB/iPod/ANDROID Preparativos: Búsqueda directa de música (usando el mando a distancia) • Seleccione [ON] para [BUILT-IN AUX] [SOURCE SELECT] . (Página 5) Pulse DIRECT. Pulse los botones numéricos para ingresar un número de pista/archivo. Comience a escuchar Pulse ENT para realizar la búsqueda de música. Conecte un reproductor de audio portátil (disponible en el mercado).
  • Page 99: Pandora

    Pandora® Preparativos: Cree y almacene una emisora nueva Instale la última versión de la aplicación Pandora en su dispositivo (iPhone/iPod touch) y, a continuación, cree una cuenta e inicie sesión Pulse en Pandora. Gire la rueda de volumen para seleccionar [NEW STATION] y, a continuación, pulse la rueda.
  • Page 100: Iheartradio

    iHeartRadio® Preparativos: Para En la placa frontal En el mando a distancia Instale la última versión de la aplicación iHeartAuto en su dispositivo (iPhone/ iPod touch) y, a continuación, cree una cuenta e inicie sesión en iHeartRadio. Reproducción/pausa Pulse 6  Pulse ENT •...
  • Page 101: Spotify

    Spotify Preparativos: En el mando a Instale la última versión de la aplicación Spotify en su dispositivo (iPhone/ Para En la placa frontal distancia iPod touch) y, a continuación, cree una cuenta e inicie sesión en Spotify. • Seleccione [ON] para [SPOTIFY SRC] [SOURCE SELECT]...
  • Page 102: Radio Siriusxm

    Radio SiriusXM® (para Solo SiriusXM® ofrece todo lo que quiere escuchar, en un solo lugar. Con más Comience a escuchar de 140 canales, incluida música sin publicidad además de lo mejor en deportes, noticias, entrevistas, comedia y entretenimiento. Bienvenido al mundo de la radio Pulse SRC repetidamente para seleccionar SIRIUS XM.
  • Page 103 Radio SiriusXM® (para Modo de tecla SiriusXM SmartFavorites y TuneStart™ Pulse y mantenga pulsada la rueda de volumen para cambiar el modo de tecla Los canales presintonizados por el usuario se reconocen como canales SmartFavorite*. El sintonizador para vehículos SiriusXM almacena (canal o repetición).
  • Page 104 Radio SiriusXM® (para Ajustes de SiriusXM [LOCK SETTING] [MATURE CH] : Selecciona la configuración de bloqueo definida por SiriusXM. ; Pulse la rueda de volumen para ingresar en [FUNCTION] [USER DEFINED] : Selecciona los canales individuales que el usuario desea Gire la rueda de volumen para seleccionar un elemento (consulte la [OFF] bloquear.
  • Page 105: Bluetooth

    BLUETOOTH® BLUETOOTH — Conexión Las funciones Bluetooth podrían no funcionar con esta unidad, dependiendo del sistema operativo y de la versión de firmware de su teléfono móvil. Perfiles Bluetooth compatibles – Perfil manos libres (HFP) – Perfil Avanzado de Distribución de Audio (A2DP) Emparejar y conectar por primera vez un dispositivo Bluetooth –...
  • Page 106 BLUETOOTH® Las siguientes operaciones pueden diferir o no estar disponibles dependiendo del Emparejamiento automático teléfono que se haya conectado. La solicitud de emparejamiento (a través de Bluetooth) se activa automáticamente Para En la placa frontal En el mando a distancia si hay un iPhone/iPod touch conectado a través del terminal de entrada USB.
  • Page 107 BLUETOOTH® *1 Este ajuste no influirá en el volumen del resto de las fuentes. Realizar una llamada *2 Pulse y mantenga pulsado VOL para aumentar continuamente el volumen a 15. *3 Las operaciones pueden variar dependiendo del dispositivo Bluetooth conectado. Puede realizar una llamada desde el historial de llamadas, la guía telefónica o mediante marcación del número.
  • Page 108 BLUETOOTH® Realice una llamada mediante reconocimiento de voz [PHONE BOOK] (Solo si el teléfono es compatible con PBAP.) Gire rápidamente la rueda de volumen para acceder al modo de búsqueda Pulse y mantenga pulsado para activar la función de reconocimiento de alfabética (si la guía telefónica contiene numerosos contactos).
  • Page 109 BLUETOOTH® Otros ajustes [INITIALIZE] [YES] : Inicializa todos los ajustes Bluetooth (incluyendo el emparejamiento [NO] almacenado, directorio telefónico y etc.). ; : Se cancela. Pulse la rueda de volumen para ingresar en [FUNCTION] Gire la rueda de volumen para seleccionar un elemento (consulte la siguiente tabla), y, a continuación, pulse la rueda.
  • Page 110 BLUETOOTH® BLUETOOTH — Audio Para En la placa frontal En el mando a distancia Repetir reproducción Pulse 4 repetidamente. ( No disponible ) [ALL REPEAT] [FILE REPEAT] [REPEAT OFF] Reproducción Pulse y mantenga pulsado 3 aleatoria para seleccionar [ALL RANDOM] ( No disponible ) •...
  • Page 111 KENWOOD Remote. [ANDROID NOT CONNECTED] : No se ha conectado ningún dispositivo Android para usar la aplicación. Preparativos: • Antes de la conexión, instale la versión más reciente de la aplicación KENWOOD [ANDROID] [SELECT] [YES] * Se visualiza sólo cuando se ajusta a Remote en su dispositivo.
  • Page 112 BLUETOOTH® Escuchar Spotify Radio Internet a través de Bluetooth Preparativos: Puede escuchar radio Internet (Pandora, iHeartRadio e Spotify) en el dispositivo Seleccione [ON] para [SPOTIFY SRC] [SOURCE SELECT] . (Página 5) iPhone/iPod touch/Android a través de Bluetooth de esta unidad. • Asegúrese de que el terminal de entrada USB no esté conectado a ningún Inicie la aplicación Spotify en su dispositivo.
  • Page 113: Ajustes De Audio

    AJUSTES DE AUDIO [MANUAL EQ] Configura sus propios ajustes de sonido para cada fuente. [USER] [PRESET EQ] • Los ajustes se guardan en [EASY EQ] • Los ajustes realizados afectan a los ajustes actuales de [62.5HZ] [LEVEL] [LEVEL –9] [LEVEL +9] [LEVEL 0] ): Ajusta el volumen a programarse para cada fuente.
  • Page 114 AJUSTES DE AUDIO [X ‘ OVER] [SOUND EFFECT] [TWEETER] [FRQ] [1KHZ] [1.6KHZ] [2.5KHZ] [4KHZ] [5KHZ] [SOUND RECNSTR] (No aplicable para la fuente RADIO, para la fuente AUX ni para la fuente [6.3KHZ] [8KHZ] [10KHZ] [12.5KHZ] : Ajusta la (Reconstrucción SIRIUS XM.) frecuencia de cruce del altavoz tweeter.
  • Page 115 AJUSTES DE AUDIO Ajustes de la alineación del tiempo digital [SW LPF SLOPE] [–6DB] [–12DB] [–18DB] [–24DB] : Ajusta la pendiente de cruce. La Alineación de Tiempo Digital ajusta el tiempo de retardo de la salida de los (Puede seleccionarse solo si se seleccionó un ajuste altavoces creando un entorno más adecuado para su vehículo.
  • Page 116: Ajustes De Visualización

    AJUSTES DE VISUALIZACIÓN AJUSTES DE AUDIO [DISTANCE] [GAIN] [DTA SETTINGS] Identificación de zonas para los ajustes de color y de brillo • Antes de realizar un ajuste para , seleccione el altavoz que desea ajustar: [FRONT LEFT] [FRONT RIGHT] [REAR LEFT] [REAR RIGHT] [SUBWOOFER] –...
  • Page 117 AJUSTES DE VISUALIZACIÓN Otros ajustes [DIMMER] Oscurece la iluminación. [ON] : El dimmer está activado. Pulse la rueda de volumen para ingresar en [FUNCTION] [OFF] : El dimmer está desactivado. Gire la rueda de volumen para seleccionar un elemento (consulte la [DIMMER TIME] : Establece el tiempo de activación y desactivación del dimmer.
  • Page 118: Aprendizaje Del Mando Adistancia Del Volante De Dirección

    Gire la rueda de volumen para seleccionar y, a continuación, pulse dirección el distribuidor Panel trasero la rueda. KENWOOD. Gire la rueda de volumen para seleccionar [USER S.REMO] y, a continuación, pulse la rueda. Configure las teclas de control Gire la rueda de volumen para seleccionar [RESET KEY] y, a continuación,...
  • Page 119: Referencias

    Para: – Últimas actualizaciones de firmware y lista de los últimos elementos compatibles • Esta unidad no puede reconocer ningún dispositivo USB cuyo régimen sea distinto de 5 V y que exceda – Aplicación original KENWOOD de 1,5 A. – Cualquier otra información más reciente Visite <www.kenwood.com/cs/ce/>.
  • Page 120 Por consiguiente, la compatibilidad podría verse afectada, y alguno o todos los servicios • El iPod no se puede utilizar si se visualiza “KENWOOD” o “ ” en el iPod. podrían dejar de estar disponibles.
  • Page 121 REFERENCIAS Cambiar la información en pantalla Nombre de la fuente Información en pantalla: Visualización principal (para ANDROID Nombre de la fuente Fecha vuelta al comienzo Cada vez que pulsa DISP, la información en pantalla cambia. • Si la información no está disponible o no está registrada, aparecerá “NO TEXT”, “NO INFO”, u otra PANDORA/ Nombre de la emisora Compartida/Radio...
  • Page 122 REFERENCIAS Cambiar la información en pantalla Nombre de la fuente Información en pantalla: Visualización principal (para ANDROID Nombre de la fuente/Reloj Reloj Se apaga la pantalla* vuelta al Cada vez que pulsa DISP, la información en pantalla cambia. comienzo • Si la información no está disponible o no está registrada, aparecerá “NO TEXT”, “NO INFO”, u otra información (por ej., nombre de la emisora) o la pantalla quedará...
  • Page 123: Problemas

    LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS Síntoma Solución Síntoma Solución El sonido no se escucha. • Ajuste el volumen al nivel óptimo. El disco no puede ser Pulse y mantenga pulsado para forzar la expulsión del • Inspeccione los cables y las conexiones. expulsado.
  • Page 124 LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS Síntoma Solución Síntoma Solución El iPod/iPhone no se enciende • Verifique la conexión entre esta unidad y el iPod/iPhone. Reproducción intermitente o Desactive el modo de ahorro de energía en el dispositivo o no funciona. •...
  • Page 125 LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS Síntoma Solución Síntoma Solución “DISCONNECTED” El USB está desconectado de la unidad cabezal. Por favor “CODE ERROR” Asegúrese de haber ingresado el código de acceso correcto. asegúrese de que el dispositivo esté correctamente conectado a (Página 16) través de USB.
  • Page 126 INSTALACIÓN/CONEXIÓN LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS Advertencia Síntoma Solución • La unidad puede utilizarse solamente con una fuente de alimentación de 12 V CC con negativo a masa. No se puede controlar • Verifique si el reproductor de audio Bluetooth conectado es •...
  • Page 127: Instalación/Conexión

    INSTALACIÓN/CONEXIÓN Lista de piezas para la instalación Instalación de la unidad (montaje en el tablero) Placa frontal (×1) Placa embellecedora (×1) Prepare el cableado necesario. (Página 40) Manguito de montaje (×1) Mazo de conductores (×1) Gancho en el lado superior Antes del montaje, oriente Salpicadero del la placa embellecedora...
  • Page 128 Si no se ha realizado ninguna conexión, no deje que el cable sobresalga de la lengüeta. Al altavoz delantero (izquierdo) Blanco/negro Gris Marrón Para conectar el sistema de navegación KENWOOD, consulte el Gris/negro Al altavoz delantero (derecho) (Silenciar cable del control) manual de navegación...
  • Page 129 INSTALACIÓN/CONEXIÓN Conexión de componentes externos Para la unidad del mando a distancia para uso marino KENWOOD, KCA-RC55MR (accesorio opcional) (página 5) Aprendizaje del mando a distancia del volante de dirección (página 30) Jack de entrada de micrófono (página 17) Puerto de expansión (12 V 500 mA): Al sintonizador para vehículos SiriusXM opcional (disponible en el mercado) (página 14)
  • Page 130: Especificaciones

    ESPECIFICACIONES FM Gama de frecuencias MP3 decodificado Compatible con MPEG-1/2 Audio Layer-3 WMA decodificado Compatible con Windows Media Audio 87,9 MHz — 107,9 MHz (pasos de 200 kHz) AAC decodificado Archivos AAC-LC “.aac” 87,5 MHz — 108,0 MHz (pasos de 50 kHz) Estándar USB USB 1.1, USB 2.0 (Alta velocidad) Sensibilidad útil...
  • Page 131 ESPECIFICACIONES Potencia de salida máxima 50 W × 4 Voltaje de trabajo Batería de 12V CC para vehículos Potencia en todo el ancho de banda 22 W × 4 Tamaño de instalación (An × Al × F) 182 mm × 53 mm × 155,5 mm (a menos del 1 % THD) (7-3/16 pulgada ×...
  • Page 132 HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS names are those of their respective owners.

Table of Contents