Wiring Connection - Kenwood KDC-MP172U Instruction Manual

INSTALLATION/CONNECTION

Wiring connection

To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
Output terminals
Antenna terminal
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red
(Ignition wire)
Yellow
(Battery wire)
IMPORTANT: We recommend installing the unit with a
commercially available custom wiring harness specific
for your car and leave this job to professionals for your
safety. Consult your car audio dealer.
Fuse (10 A)
When connecting to an external amplifier, connect
its ground wire to the car's chassis to avoid damaging
the unit.
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote
control wire)
To the terminal that is grounded when the
telephone rings or during conversation
( 13)
(To connect the Kenwood navigation
system, refer your navigation manual.)
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter
ENGLISH
17