Backing Up the CMOS
Make sure the computer to be backed up is turned on. Connect the removable storage to the
1.
computer.
Boot to DOS.
2.
Type N:\folder\BIOS.exe SAVE:ABC001.DAT (where N is the drive letter of the removable
3.
storage) to save the CMOS setting to the removable storage device.
Restoring the CMOS
Make sure the target computer is turned on. Connect the removable storage to the target computer.
1.
Boot to DOS.
2.
Type N:\folder\BIOS.exe LOAD:ABC001.DAT (where N is the drive letter of the removable
3.
storage) to load the custom CMOS setting onto the target system.
ENWW
Recovering the Configuration Settings
11