Table of Contents
Advertisement
WebPAM User Manual
Delete a Spare Drive
To delete a spare drive:
1.
Click on the Logical Drive View
2.
Select the Delete tab.
3.
Check the box to the left of the spare drive you want to delete.
4.
Click the Delete button.
5.
In the Confirmation box, click the OK button.
The selected spare drive is deleted.
Battery
The Information tab displays information about the cache-backup battery.
To access the Controller–Information tab, click on the Battery
View.
•
Temperature – The battery's operating temperature.
The battery normally has the same temperature as the inside of the PC
where it is installed, typically below 38°C or 100°F.
If the battery temperature rises above this value, determine whether the PC
is overheating.
If the PC is OK but the battery is too hot, the battery is not accepting a
charge properly and you must replace it.
•
Voltage – The battery supplies 3.3V to back up the controller cache in the
event of a power failure. If battery voltage drops below this value, the battery
is not accepting a charge properly and you must replace it.
If the Battery icon does not appear in Tree View, the battery is either
disconnected or was not installed.
icon.
88
icon in Tree
Advertisement
Table of Contents
