WebPAM User Manual
•
Write Back – Increases performance but can result in data loss in the
event of a power failure. This is the default.
•
Write Through – Slower but more secure.
6.
Click the Submit button when you are done.
Logical Drive Mapping
This feature applies to RAID 10 logical drives only. To access logical drive
settings:
1.
Click on the Logical Drive View
2.
Click on the Logical Drive
3.
Click on the Drive Mapping tab in Management View.
The Drive Mapping tab shows how the stripe an mirror components of the RAID
10 logical drive are mapped to the physical drives.
Logical Drive Migration and Expansion
The Logical Drive–Migration tab enables you to migrate or expand a logical drive.
Migration is the process of changing the RAID level of an existing logical drive.
Expansion is the process of adding more physical drives to a logical drive while
keeping the same RAID level.
Migration and Expansion are not available for JBOD.
The Migration feature applies to certain combinations of RAID level and number
of physical drives, as described in the table below.
From
icon in Tree View.
icon of the logical drive you want to see.
To
68
Result