Table of Contents
Advertisement
WebPAM User Manual
Java Runtime Environment
If you are planning to use other applications that rely on JRE or JDK, always
install them first before you install WebPAM. WebPAM will use the existing JRE
rather than installing a second one.
WebPAM will install JRE 1.4 on your system unless you already have JRE or JDK
versions 1.3.0 or 1.4.
Operating System Support
On the Host PC where you install the FastTrak controller and WebPAM, Promise
Technology recommends:
•
Windows 2000
•
Windows XP Professional
•
Windows 2003
The Utility Server supports these operating systems. Choose one of them to take
full advantage of all the features of WebPAM.
Before You Start...
In order for WebPAM to install and configure properly, there must be a logical
drive on the FastTrak Controller.
To create a logical drive on the FastTrak Controller:
1.
Exit Windows and reboot your PC.
2.
When the FastTrak BIOS appears, press Ctrl-F to enter the the FastBuild
menu.
3.
Create a temporary logical drive.
The logical drive will appear as PROMISE LD1 in WebPAM after installation.
4.
Exit the FastBuild utility and allow the PC to finish booting to Windows.
For more detailed instructions on the FastBuild utility, see the FastTrak SX Series
RAID Controller User Manual.
8
Advertisement
Table of Contents
