Table of Contents
Advertisement
Chapter 3: Setup
•
Log-in to WebPAM (page 17)
•
Access a Host PC (page 19)
•
Recommended Initial Settings (page 20)
•
Delete the Temporary Logical Drive (page 22)
•
Create a New Logical Drive (page 23)
•
Log-out of WebPAM (page 27)
•
Internet Connection using WebPAM (page 27)
•
Run WebPAM without Network Connection (page 27)
After installation, the next step is to log into and configure WebPAM PRO.
Log-in to WebPAM
Double-click on the WebPAM icon on your desktop (right). Or,
1.
Launch your Browser.
2.
In the Browser address field, type in the IP address of the Host PC, as
explained below.
If you did not choose the External Security option during WebPAM
installation (see page 12), use the Regular connection.
If you chose the External Security option during WebPAM installation, use
the Secure connection.
Regular Connection
•
WebPAM uses an HTTP connection . . . . . . . . . . . . . . . . . . . . .http://
•
Enter the Host PC's IP address . . . . . . . . . . . . . . . . . . . . . 127.0.0.1
•
Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
•
Add to launch WebPAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
http://127.0.0.1:8080/promise
Secure Connection
•
WebPAM uses a secure HTTP connection . . . . . . . . . . . . . . .https://
•
Enter the Host PC's IP address . . . . . . . . . . . . . . . . . . . . . 127.0.0.1
•
Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443
•
Add to launch WebPAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
17
Advertisement
Table of Contents
