Table of Contents
Advertisement
Identify the Failed Disk Drive
Click on the Physical Drive View
a missing physical drive. A drive that used to be present but is suddenly absent is
the failed disk drive.
In this example, there were four disk drives connected to the FastTrak Controller.
Notice that there is no drive on Port 3. This is the failed drive.
Replace the Failed Disk Drive
Replace the failed disk drive with a new one of equal or greater capacity. Then
rebuild the logical drive. See the FastTrak User Manual and SuperSwap User
Manual for more information about replacing a disk drive.
Rebuild Your Logical Drive
1.
Click on the Logical Drive View
2.
Click on the Logical Drive
3.
Click on the Rebuild tab in Management View.
icon in the WebPAM user interface. Look for
icon in Tree View.
icon of the logical drive you want to rebuild.
81
Chapter 5: Monitor and Manage
No drive
on Port 3
Port 1
Port 2
Port 4
Advertisement
Table of Contents
