Full Return To Factory Defaults - HP 8100 - Elite Convertible Minitower PC Setup And Configuration Manual

c. After unprovisioning is done, control is passed back to the AMT
Configuration screen.
Notice that the Setup and Configuration option is available again since the
system is set to the default Enterprise mode.
2) Return to previous menu.
3) Exit.
a. Select Y.
4) System will reboot.
A partial unprovisioning will re-open the network interface for 6 hours of Hello
message broadcasts.

Full Return to Factory Defaults

All MEBx settings can be returned to the factory default by clearing CMOS. This
includes resetting the password to the default "admin". The system will need to be
Setup and Configured again before remote management is possible. Any non-
default certificate hashes will have to be re-applied.
44