Oem Tls-Psk; Usb Drive Key Setup And Configuration - HP 8100 - Elite Convertible Minitower PC Setup And Configuration Manual

OEM TLS-PSK

OEM TLS-PSK AMT Setup and Configuration is done in two stages. The first stage
is performed during OEM manufacturing and the second stage at the customer
location.
In the first stage, customers purchase systems from HP. HP will setup those systems
during manufacturing bringing them to the In-Setup phase. The new Admin
Password, PID, and PSS generated during HP manufacturing are transferred to the
customer in a separate and secured fashion. That information along with the new
admin password is provided to the customer. After manufacturing, the systems are
shipped to the customer in the In-Setup state.
Alternatively, the customer can provide HP with their own set of Admin Password,
PID, and PPS to use for the order. HP will use the customer generated Admin PW,
PID and PPS to bring the systems into the In-Setup phase.
In the second stage, the customer receives the In-Setup systems and the PID, PPS,
and password information. The PID, PPS, and password information is integrated
into the customer S&CS. The In-Setup systems are then connected to the network
and powered on. Enterprise Mode – AMT Configuration occurs. Some ISV's may
require additional settings, such as the SC&S port number and SC&S IP address.
Contact your Management Console ISV for more details.
During the second stage AMT Configuration, the S&CS will generate a new PID
and PPS combination for each of the systems and delete OEM PID/PPS from and
Configuration Server database.
The OEM TLS-PSK method places the work of AMT Setup on the OEM. All the
customer needs to do is plug in the systems and finish the configuration. Once this
is done, the system will be in the Operational phase and ready to use.
HP provides a fee-based customized service that will AMT Setup systems in the
factory and securely provide pre-shared keys to the customer. HP offers a secured
service that will eliminate manual AMT Setup of each unit at the customer site.
Please contact HP for more information about this valuable service.

USB Drive Key Setup and Configuration

Password, PID, and PPS information can be Setup and Configured locally with a
USB Drive Key. This allows an IT technician to manually Setup and Configure
systems without the problems of manually typing in entries.
The following is a typical USB Drive Key Setup and Configuration procedure:
1) An IT technician inserts a USB Drive Key into a system with a management
console.
2) The technician request local Setup and Configuration records from an S&CS
through the console.
3) The S&CS will:
a. Generate the appropriate amount of passwords, PID and PPS sets.
b. Store them in its database.
37