Removing A Back System Fan Housing - Dell PowerEdge XK946 Hardware Owner's Manual

6 Position the fan in the fan housing.
7 Lower the replacement fan into the housing until it snaps into place.

Removing a Back System Fan Housing

CAUTION:
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1 Ensure power is removed.
2 Open the system. See "Removing the Top Cover" on page 60.
3 Remove memory risers. See "Removing a Memory Riser" on page 96.
4 Remove applicable back system fans. See "Removing a Back System Fan"
on page 72.
5 Pull the fan housing latch forward and lift back system fan housing clear of
the chassis.
74
Installing System Components
Only trained service technicians are authorized to remove the system