Dell PowerEdge XK946 Hardware Owner's Manual page 14

1
Power button/indicator.
2 NMI button.
3 System identification button.
14
About Your System
The power-on indicator lights when the
system power is on.
The power button controls the DC
power supply output to the system.
NOTE:
If you turn off the system using the
power button and the system is running an
ACPI-compliant operating system, the
system performs a graceful shutdown
before the power is turned off. If the
system is not running an ACPI-compliant
operating system, the power is turned off
immediately after the power button is
pressed.
Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the LCD
panel on the front and the blue system
status indicator on the back blink until
one of the buttons is pushed again.