Removing The System Top Cover (Back) - Dell PowerEdge C4130 Owner's Manual

Figure 9. Installing the system top cover (front)
1. system top cover (front)
3. system cover lock
Next steps
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Related Links
Safety instructions
Removing the system top cover (front)

Removing the system top cover (back)

Prerequisites
CAUTION: Do not operate the system without the system cover. This can result in overheating
and cause component damage.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
4. Remove the system from the rack.
5. Keep the Phillips #1 screwdriver ready.
Steps
1. Remove the screws securing the system top cover to the chassis.
2. Slide the system top cover toward the back of the system.
3. Hold the cover on both sides, and lift the cover away from the system.
62
2. release tab (2)