Removing A Raid Battery - Dell PowerEdge XK946 Hardware Owner's Manual

Figure 3-13. Installing a RAID Battery
1
1 Mounting hole (2)
3 Battery carrier guide

Removing a RAID Battery

1 Remove the SAS controller card. See "Removing a SAS Controller Card"
on page 80
2 Pull the RAID battery carrier latch away from the chassis.
3 Lift the RAID battery carrier out of the system.
4 Gently pulling back the two guides holding the RAID battery into the
battery carrier, remove the RAID battery from the battery carrier.
2
3
2 RAID battery latch
Installing System Components
85