Board Guide - Compaq 141536-002 - Deskpro EN - MT RAMBUS Maintenance And Service Manual

Convertible minitower models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

4.14

Board Guide

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Lay the computer down on its large base (side with feet) for greater stability.
3. Remove the access panel (Section 4.6).
4. Remove any full-length expansion boards (Section 4.13.2).
5. Push down on the two tabs on the side of the board guide.
6. While holding the tabs down, remove the guide from the chassis.
To replace the board guide, reverse the above procedures.
Compaq Deskpro EN Series of Personal Computers
4-25

Advertisement

Table of Contents
loading

Table of Contents