1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Desktop
  5. 141536-002 - Deskpro EN - MT RAMBUS
  6. Maintenance and service manual

Front Bezel - Compaq 141536-002 - Deskpro EN - MT RAMBUS Maintenance And Service Manual

Convertible minitower models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

4.7

Front Bezel

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Lay the computer down on its large base (side with feet) for greater stability.
3. Remove the access panel (Section 4.6).
4. Press the two release tabs 1 at the top of the front bezel.
5. Rotate the front bezel away from the chassis 2 to remove it from the unit.
✎
When replacing the front bezel, ensure that the bottom hinge points are properly
placed in the chassis before rotating the front bezel back into its original position.
4-6
Removal and Replacement Procedures

Advertisement

Table of Contents
loading

Related Manuals for Compaq 141536-002 - Deskpro EN - MT RAMBUS

Related Content for Compaq 141536-002 - Deskpro EN - MT RAMBUS

This manual is also suitable for:

144479-002 - deskpro en - 64 mb ram150236-002 - deskpro en - 6550 model 10000154723-003 - deskpro en - sff 6600 model 10000154727-002 - deskpro en - sff 6600 model 13500154883-002 - deskpro en - mt 6600 model 10000154884-005 - deskpro en - 6600 model 10000 cds ... Show all

Table of Contents