Compaq 141536-002 - Deskpro EN - MT RAMBUS Maintenance And Service Manual page 67

Convertible minitower models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

Installing a GPA/AIMM Card
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
1. Prepare the computer for disassembly (Section 4.2).
2. Lay the computer down on its large base (side with feet) for greater stability.
3. Remove the access panel (Section 4.6).
4. Insert the hook 1 on the left side of the GPA/AIMM card under the loop 2 on the left
side of the retention mechanism.
5. Rotate the right side of the card down until it is at a 45 degree angle 3.
4-30
Removal and Replacement Procedures

Advertisement

Table of Contents
loading

Table of Contents