Converting A Minitower To A Desktop - Compaq 141536-002 - Deskpro EN - MT RAMBUS Maintenance And Service Manual

Convertible minitower models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

4.24

Converting a Minitower to a Desktop

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Lay the computer down on its large base (side with feet) for greater stability.
3. Remove the access panel (Section 4.6).
4. Remove the front bezel (Section 4.7).
5. Disconnect all power and data cables from the drives in the 5.25-inch drive bays.
6. Remove the drives from the 5.25-inch drive bays by pressing drivelock 2
(Sections 4.11.2 and 4.11.3).
Compaq Deskpro EN Series of Personal Computers
4-43

Advertisement

Table of Contents
loading

Table of Contents