Removing A Hard Drive From A Hard-Drive Bracket; Installing A Hard Drive Into A Hard-Drive Bracket - Dell PowerEdge E07S Series Owner's Manual

Removing a Hard Drive From a Hard-Drive Bracket

Remove the screws from the slide rails on the hard-drive bracket and separate
the hard drive from the bracket. See Figure 3-9.
Figure 3-9. Removing and Installing a Hard Drive From a Hard-Drive Bracket
1
4
1 screws (4)*
3 SAS/SATA screw holes (4)
*Screws are supplied along with the hard drives ordered from Dell.

Installing a Hard Drive Into a Hard-Drive Bracket

1 Insert the hard drive into the hard-drive bracket with the connector end of
the drive at the back. See Figure 3-9.
2 Align the screw holes on the hard drive with the back set of holes on the
hard-drive bracket.
When aligned correctly, the back of the hard drive will be flush with the
back of the hard-drive bracket.
3 Attach the four screws to secure the hard drive to the hard-drive bracket.
2 hard drive
4 hard-drive bracket
Installing System Components
2
3
91