Guidelines For Connecting External Devices; Nic Indicator Codes - Dell PowerEdge E07S Series Owner's Manual

Guidelines for Connecting External Devices

• Turn off power to the system and external devices before attaching a new
external device. Turn on any external devices before turning on the system
(unless the documentation for the device specifies otherwise).
• Ensure that the appropriate driver for the attached device has been
installed on the system.
• If necessary to enable ports on your system, use the System Setup program.
See "Entering the System Setup Program" on page 54.

NIC Indicator Codes

Figure 1-5. NIC Indicator Codes
1 link indicator
Indicator
Link and activity
indicators are off
Link indicator is green
Link indicator is amber
Activity indicator is green
blinking
1
2
Indicator Code
The NIC is not connected to the network.
The NIC is connected to a valid network link at 1000
Mbps.
The NIC is connected to a valid network link at 10/100
Mbps.
Network data is being sent or received.
2
activity indicator
About Your System
21