Installing A Cooling Fan - Dell PowerEdge E07S Series Owner's Manual

Figure 3-16. Removing and Installing a Fan
1
1 fan

Installing a Cooling Fan

1 Ensure that the fan is oriented correctly.
Orient the fan module so that the side with the power cable faces toward the
back of the system.
2 Lower the fan into the fan assembly until the fan is fully seated.
See Figure 3-16.
3 Connect the fan's power cable to the power connector on the system board.
4 Replace the cooling shroud or power distribution board shroud as applicable.
See "Installing the Cooling Shroud" on page 102.
2 power cable
Installing System Components
2
113