2 Align the connector and the three protrusions of the wireless adapter with the
four holes and insert the adapter.
NOTE:
3 Turn on the printer.
NOTE:
operator panel, always do as instructed.
4 Print the system settings report to confirm that the wireless adapter is
installed correctly.
Printing System Settings Report
When Using the Operator panel
Press the
a
Press
b
the
Ensure that Report/List is highlighted, and then press the
c
button.
Ensure that System Settings is highlighted, and then press the
d
(Set) button.
The system settings report is printed.
When Using the Tool Box
NOTE:
Ensure that the adapter is fully inserted and secured.
If a message displays telling you to make initial setup on the
(Menu) button.
button until System Setup is highlighted, and then press
(Set) button.
Installing Optional Accessories
(Set)
67