Power Saver Wake Up
Purpose:
To specify whether to wake up from the Sleep or Deep Sleep mode when
OnHook is set to Off.
Values:
OffHook Wake Up
Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the default
settings and return to the standby mode after you do not specify any settings for
the specified time.
Values:
*
45sec
1min
2min
3min
4min
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops
abnormally. The print job is cancelled if the time-out time is exceeded.
Values:
Off
*
*
On
60sec
3-300 sec.
502
Understanding the Printer Menus
*
Off
Does not wake up from the Sleep or Deep Sleep mode
when OnHook is set to Off.
On
Wakes up from the Sleep or Deep Sleep mode when
OnHook is set to Off.
Disables the fault time-out.
Sets the amount of time the printer waits before canceling a job
that stops abnormally.