Dell COLOR PRINTER 2155CDN User Manual page 198

Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
Base Tone
All Tones
mm / inch
Default Print Paper Size
Auto Log Print
Print ID
Print Text
Banner Sheet Insert Position
Banner Sheet Specify Tray
*2
RAM Disk
Substitute Tray
196
Dell Printer Configuration Web Tool
Sets the volume of the tone that is emitted when a
job other than a copy job is complete, or disables
the tone.
Sets the volume of the tone that is emitted when a
job ends abnormally, or disables the tone.
Sets the volume of the tone that is emitted when a
problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the
printer runs out of paper, or disables the tone.
Sets the volume of the tone that is emitted when the
toner is low, or disables the tone.
Sets the volume of the tone that is emitted 5 seconds
before the printer performs auto clear, or disables
the tone.
Sets the volume of the tone that is emitted when the
operator panel screen returns to the default setting
by scrolling the loop menu, or disables the tone.
Sets the volume of all the alert tones, or disables all
the tones.
Sets the measurement unit to be used on the
operator panel screen as either mm or inches.
Sets the default print paper size.
Specifies if a job history needs to be printed after
every 20 jobs.
Sets where to print the user ID on the output paper.
Sets whether the printer outputs PDL data (which is
not supported by the printer) as text when the
printer receives it.
*1
Sets where to insert a banner sheet in the output.
*1
Sets from which tray a banner sheet is fed.
Sets whether to allocate RAM for the file system for
the Secure Print and Store Print features.
Sets whether to use another size paper when the
paper that is loaded in the specified tray does not
match the paper size settings for the current job.