Select Connect to a network.
c
Select dell_device from the network items listed in Connect to a
d
network.
Select Connect Anyway in the warning dialog box indicating you are
e
entering an unsecured area.
Click Close in the dialog box after confirming the connection is a
f
success.
For Windows Server 2008 R2 and Windows 7:
Open Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select dell_device from the network items listed in the available
e
network list, and click Connect.
2 Check the IP address assigned by AutoIP on the printer.
Press the
a
Press
b
the
(Set) button.
Press
c
(Set) button.
Press
d
(Set) button.
Press
e
(Set) button.
Press
f
button.
Check the IP address displayed on the operator panel.
3 Check that the IP address on your computer is assigned by DHCP.
(Menu) button.
button until System Setup is highlighted, and then press
button until Admin Menu is highlighted, and then press the
button until Network is highlighted, and then press the
button until TCP/IP is highlighted, and then press the
button until IPv4 is highlighted, and then press the
Installing Optional Accessories
(Set)
81