Ricoh Priport DX 4640PD Operating Instructions Manual page 39

❖ "Eco. Mode"
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ "Speed Select"
You can select the printing speed.
❖ "Skip Feed"
• Use to make the interval between paper feeds longer, allowing the ink
to dry.
• Use to print paper longer than the standard size.
Limitation
❒ The maximum length of paper that can be printed using Skip Feed is 460
mm. However, when printing on paper longer than 432 mm, the deliv-
ered paper may fall off the paper delivery end plate. Therefore, you
should hold the paper so that it does not fall off.
❖ "Separate"
When set to "On", classifying will occur whenever the document data
changes.
❖ "Enable short master"
You can select whether to set the length of the master automatically.
❖ "Rotate image"
When set to "180 degrees", the image will be rotated 180 degrees and print-
ed. This is very convenient when printing on envelopes. See p.41 "Printing
onto envelopes"
❖ "Brightness"
The brightness of the whole printed image can be adjusted to one of seven
levels.
Note
❒ The brightness of the color of characters does not change.
❖ "Line Density (lpi)"
You can select the screen ruling (resolution).
❖ "Separate into CMYK"
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If "Don't Separate" is selected, separation will not be done.
Windows NT 4.0
1
35