Table of Contents
Advertisement
73195 rev2
24/10/05
Exhaust filter
This filter should be replaced every
12 months or sooner if required.
Remove the exhaust filter grille by pulling
the locking tabs towards you L. Remove the
used filter. Insert the clean micro exhaust
filter and replace the filter grille.
IMPORTANT
• Always disconnect the cleaner from the
mains when checking filters.
• All filters should be checked regularly for
signs of damage, preferably after each
cleaning task. The filters must be replaced
immediately if they become damaged.
• Always make sure all filters are fitted
before use. Failure to do so may result in
damage to your product.
• If the sound of the cleaner changes
slightly, clean the filters and check for
blockages.
Safety cut-out
If the cleaner overheats a motor
protection thermostat will automatically
switch the cleaner off. If this happens,
switch the cleaner off, unplug from
power supply and leave the cleaner to
cool for at least 45 minutes. Check the
airways for blockages, empty dust canister
and clean the filters before restarting.
L
11:55 AM
Page 8
Care and
maintenance
Your cleaner is manufactured to withstand
normal day-to-day use, but an occasional
wipe over with a damp cloth will help
maintain its good looks. Abrasive cleaners
should not be used.
Purchasing filters
Use original filters. Replacement filters
can be purchased from specialist retailers or
directly from our Replacement Parts
telephone number shown below.
Helpline
If you have any difficulty with your
appliance do not hesitate to call us. We are
likely to be more help than the store from
where it was bought.
Please have the following information
ready to enable our staff to help you.
• Name of product
• Model number as shown on the underside
of the appliance.
7
Advertisement
Table of Contents
