Table of Contents
Advertisement
73195 rev2
24/10/05
If there is resistance when you re-fit
the pod onto the cleaner, remove and
carefully reseat the filter assembly back
into the pod, ensuring the filter assembly
seal is located fully and neatly.
G
Washing the
pleated filter
For total cleaning of the pleated filter it
should be washed with warm water with no
detergents. Allow filter to air dry.
A SPARE FILTER IS PROVIDED. This
allows continued use of the cleaner whilst
the other filter is drying.
IMPORTANT: The filter must be
completely dry before re-fitting.
11:55 AM
Page 6
Advertisement
Table of Contents
