Bulbs - BMW HP2 ENDURO Manual

7
84
On the right-hand side,
engage auxiliary stand
(001651) in mount 4.
z
Push adjustable pin 1 into
mount 5.
Locking pin 2 engages.
Placing motorcycle on
auxiliary stand
Hold the motorcycle upright
and balanced, so that both
skids of the auxiliary stand
are on the ground.
Place your left foot on
lever 1.
Take a firm grip of 2 with
your right hand.
Keeping plenty of weight on
the lever, push the motor-
cycle forward until the auxil-
iary stand is seated against
the frame.

Bulbs

General instructions
A warning appears in the mul-
tifunction display if a bulb is
defective. If the brake light
or rear light fails, the warn-
ing is accompanied by the
General warning light light-
ing up yellow. If the rear light
fails the second filament of
the brake light shines at re-
duced brightness to double
as a rear light. Even though
you have this substitute rear
light, the indicators in the dis-
play tell you that a bulb defect
has occurred.
A defective bulb places
your safety at risk be-
cause it is easier for other
users to oversee you and
your motorcycle.
Replace defective bulbs as
soon as possible; always