Bulbs
Replacing low-beam and
high-beam headlight bulb
The positions of the plug,
the spring retainer and the
bulb might not be as illustrated
below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove high-beam headlight
cover 1 or low-beam headlight
cover 2 by turning the cover
counter-clockwise.
Disconnect plug 3.
Disengage spring clip 4 and
swing it aside.
Remove bulb 5.
Replace the defective bulb.
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Hold the new bulb by the base
only, in order to keep the glass
free of foreign matter.
Install bulb 5, making sure that
tab 6 is correctly positioned.
8
113
z