BMW HP2 ENDURO Manual page 96

Hold rear-light protector 3 in
position.
Install screws 1.
Install screws 2.
Installing the seat (
Replacing turn indicator
bulbs
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Remove screw 1.
43)
Pull the glass out of the
reflector housing at the
threaded-fastener side.
Turn bulb 2 counter-
clockwise and remove it
from the bulb housing.
Replace the defective bulb.
Front flashing turn in-
dicator bulbs
R10W / 12 V / 10 W
Rear flashing turn in-
dicator bulbs
R10W / 12 V / 10 W
with OA White flashing
turn indicators:
RY10W / 12 V / 10 W
7
91
z