BMW HP2 ENDURO Manual page 43

4
38
Remove bottom handlebar
clamping blocks 4.
z
Place bottom handlebar
clamping blocks 4 in posi-
tion with tapped holes 5 to
the rear.
Handlebars toward rider
(shorter reach).
Place bottom handlebar
clamping blocks 4 in posi-
tion with tapped holes 5 to
the front.
Handlebars away from rider
(longer reach).
Install the bottom handle-
bar clamping blocks in the
desired position for the ap-
propriate reach.
Position the handlebars
and top handlebar clamp-
ing blocks 3 on the bottom
handlebar clamping blocks,
and hold the handlebars in
position.
Install large screws 2, but
do not tighten.