BMW HP2 ENDURO Manual page 86

Install spacer sleeve 6.
Roll the front wheel into po-
sition between the forks,
making sure that the brake
disc passes between the
brake pads.
Insert axle 4.
Install axle screw 2.
Front wheel, axle
screw in axle holder
Thread-locking
compound: Optimoly TA
40 Nm
Without operating the
brakes: firmly compress the
forks and release; repeat
the procedure several
times.
Tighten left axle clamping
screws 1.
Pinch bolt, axle holder
Tightening sequence: 2x
each side, alternately
8 Nm
7
81
z