Dell MTC2 User Manual page 86

Check all cable connections, and fold cables out of the way to provide airflow for the
13
fan and cooling vents.
Replace the computer cover (see page 96).
14
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
15
After you turn on your computer, press <F2> when you are prompted to enter setup
16
mode.
Highlight Drive Configuration and press <Enter>.
17
Use the left and right arrows to change Diskette Drive A from Not Installed to 3.5
18
inch, 1.44 MB.
Press <Enter>.
19
86
Re m ov i n g a n d I ns t al l i n g Pa r t s
side hinges (3)
front panel