Undoing The Last System Restore; Resolving Software And Hardware Incompatibilities - Dell MTC2 User Manual

Undoing the Last System Restore

NOTICE: Before you undo the last system restore, save and close all open files and exit any
open programs. Do not alter, open, or delete any files or programs until the system restoration is
complete.
Click the Start button, point to All Programs→ Accessories→ System Tools, and then
1
click System Restore.
Click Undo my last restoration and click Next.
2
Click Next.
3
The System Restore screen appears and the computer restarts.
After the computer restarts, click OK.
4
Enabling System Restore
If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System
Restore is automatically disabled. To see if System Restore is enabled:
Click the Start button and click Control Panel.
1
Click Performance and Maintenance.
2
Click System.
3
Click the System Restore tab.
4
Ensure that Turn off System Restore is unchecked.
5
Resolving Software and Hardware
Incompatibilities
Windows XP IRQ conflicts occur if a device either is not detected during the operating
system setup or is detected but incorrectly configured.
To check for conflicts on a computer running Windows XP:
Click the Start button and click Control Panel.
1
Click Performance and Maintenance and click System.
2
Click the Hardware tab and click Device Manager.
3
66
Advanced Troubleshooting