Dell MTC2 User Manual page 44

44
So l vi n g Pro b l em s
I
F Y O U C O N N E C T E D T H E M O U S E A F T E R T U R N I N G O N T H E C O M P U T E R
R E M O V E T H E P O W E R C A B L E
— If the mouse is connected after the power is turned on, the mouse
C A B L E
appears to be nonfunctional. To make the mouse function properly:
While your computer is on, remove the power cable from the back of the
1
computer.
Connect the mouse to the computer.
2
Reconnect the power cable.
3
Turn on your computer.
4
Pressing the power button does not clear the computer's settings and does not
restore mouse functionality.
C
H E C K T H E M O U S E C A B L E
• Check the cable connector for bent or broken pins and for damaged or frayed
cables. Straighten bent pins.
• Ensure that the cable is firmly connected to the computer.
T — Connect a properly working mouse to the computer, and
E S T T H E M O U S E
try using the mouse. If the new mouse works, the original mouse was faulty.
C
H E C K T H E M O U S E S E T T I N G S
Click the Start button, click Control Panel, and then click Printers and Other
1
Hardware.
Click Mouse.
2
Try adjusting the settings.
3
R
E I N S T A L L T H E M O U S E D R I V E R
C
H E C K F O R I N T E R R U P T R E Q U E S T C O N F L I C T S
,
A N D T H E N R E C O N N E C T T H E M O U S E
—
—
— See page 63.
— See page 66.
,