Starting The Dell Diagnostics From The Drivers And Utilities Media - Dell Inspiron 530sa Owner's Manual

Starting the Dell Diagnostics From the Drivers and Utilities Media

1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE:
to wait until you see the Microsoft
computer and try again.
NOTE:
next start-up, the computer boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and
press <Enter>.
4 Select the Boot from CD-ROM option from the menu that appears and
press <Enter>.
5 Type 1 to start the CD menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple
versions are listed, select the version appropriate for your computer.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.
If you wait too long and the operating system logo appears, continue
The next steps change the boot sequence for one time only. On the
® ®
Windows desktop; then, shut down your
Troubleshooting Tools
89