V
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
Windows XP:
1
Click Start→ Control Panel→ Printers and Other Hardware→ Scanners and
Cameras.
2
If your scanner is listed, Windows recognizes the scanner.
Windows Vista:
1
Start
Click
If the scanner is listed, Windows recognizes the scanner.
R
E I N S T A L L T H E S C A N N E R D R I V E R
instructions.
Sound and Speaker Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
No sound from speakers
NOTE:
The volume control in some MP3 players overrides the Windows volume
setting. If you have been listening to MP3 songs, ensure that you did not turn the
player volume down or off.
C
H E C K T H E S P E A K E R C A B L E C O N N E C T I O N S
connected as shown on the setup diagram supplied with the speakers. If you
purchased a sound card, ensure that the speakers are connected to the card.
E
N S U R E T H A T T H E C O R R E C T A U D I O S O L U T I O N I S E N A B L E D I N T H E
P R O G R A M
— See "System Setup" on page 185.
N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N
E
setup diagram supplied with the speakers. If your speakers have volume controls,
adjust the volume, bass, or treble to eliminate distortion.
→ Control Panel→ Hardware and Sound→ Scanners and Cameras.
— See the scanner documentation for
M
I C R O S O F T
W
— Ensure that the speakers are
Solving Problems
I N D O W S
—
B I O S
S E T U P
— See the
79