Power Management Options In Windows Vista; Standby Mode - Dell Inspiron 530sa Owner's Manual

For more information on power management options:
1 Click the Start button, then click Help and Support.
2 In the Help and Support window, click Performance and maintenance.
3 In the Performance and maintenance window, click Conserving power on
your computer.

Power Management Options in Windows Vista

The Windows Vista
amount of electricity your computer uses when it is on and you are not using
it. You can reduce power to just the monitor or the hard drive, and Windows
Vista sets the default "off" state to standby mode or you can set hibernate
mode to reduce power even further.
When the computer exits from a power conservation mode (Standby or
Hibernate), the Windows desktop is restored to the state it was in before it
entered the mode.
Windows Vista has three main default power management modes:
• Balanced
• Power Saver
• High Performance
Dell has added a fourth, Dell-Recommended mode that sets power
management to the most typical settings for the majority of our customers.
This is the active Power Plan.

Standby Mode

Standby mode is the default "off" state for Windows Vista. Standby mode
conserves power by turning off the display and the hard drive after a time-out.
When the computer exits from standby mode, it returns to the operating
state it was in before it entered standby mode.
To set standby mode to automatically activate after a defined period of
inactivity:
1 Click Start
2 Under Pick a category, click System and Maintenance.
3 Under System and Maintenance, click Power Options.
44
Setting Up and Using Your Computer
®
power management features are designed to reduce the
and click Control Panel.
®